This page details the Clear Coating process I performed on a 1977 Bally Eight Ball Playfield.  The procedure closely follows the steps described in Clay's document:

http://www.marvin3m.com/restore/index.htm

I picked up the Eight Ball playfield from someone parting out a game.  The Playfield was in good shape except for a bag of sugar was sitting on the board by the spinner target (see picture).  The sugar somehow became saturated and permanently became attached to the PF.

To see how I removed the sugar that was stuck to the Playfield and touched up the Playfield go to Playfield Touchups.

The Playfield also had the slingshot Mylars installed.  To see how I removed the Mylar go to Mylar Removal.

To see all of the Products and Tools I used to Clear Coat the Playfield go to Tools/Products.

The rest of this page is under construction and will be finished during the Spring of 2002.

This page was last updated on 03/01/02